The TM631/TM632/TM635 digital vibration transmitter monitor is ideal for monitoring machine vibration using proximity probes. The monitor contains redundant relay outputs and 4-20mA transmission, it can interface to a PLC or DCS system. The monitor works without probe driver. Using Provibtech’s unique technology, the monitor can interface with almost any proximity probe system without hardware changes.

The TM611 Seismic vibration transmitter-monitor provides a simple and cost-effective solution for monitoring “balance-of-plant” equipment. The TM611’s smart design is extremely reliable with redundancy in 4-20mA outputs and relay outputs, as well as a Modbus communication port. The TM611 monitor can interface with almost any vibration sensor (accelerometer or velocity transducer).

The TM621/TM622/TM625 digital vibration transmitter monitor is ideal for monitoring machine vibration using proximity probes. The monitor contains redundant relay outputs, redundancy 4-20mA transmission and MODBUS-RTU output, it can interface to a PLC or DCS system. (Shaft Vibration, Thrust Position and Speed) .

ProvibTech has released TM531, TM532 and TM591 series digital transmitter monitor. TM301, TM302 series have been obsolete and fully replaced by TM531,TM532 series since June, 2013. No any TM301/TM302 stock product can be supplied by any distributor.

The system is composed with three parts, an ICP type accelerometer, a TM101 Transmitter-Monitor, and an optional 4-20mA display.

The Transmitter-Monitor system can indicate acceleration, velocity or displacement, with alert and danger relay outputs.

The Transmitter-Monitor also have all the features mentioned in the "introduction" section. Please see that section for details

TM201/TM202 directly interfaces with any eddy-probe systems. TM201/TM202 has distinguished features from other TM (transmitter-monitors). TM201 can work both in normal area and hazardous area with the use of barrier such as TM0401.

ProvibTech has released TM531, TM532 and TM591 series digital transmitter monitor. TM301, TM302 series have been obsolete and fully replaced by TM531,TM532 series since June, 2013. No any TM301/TM302 stock product can be supplied by any distributor.

For the customers in China, if you have any question about TM301/TM302, please contact with ProvibTech China for help. Detailed contact information is below.

PROVIBTECH CHINA
Room 1905, Hua Teng Bei Tang Plaza,
37 Nan Mo Fang Road,
Beijing, China 100022
Phone: +86-10-5190-8800
Fax: +86-10-5190-8761
Email: china@predictech.cn

TM501/TM502 will directly interface with the eddy-probe system. TM501/TM502 (build in driver)will measure the shaft rotation speed, process the signal, and output 4-20mA which proportional to the speed.

YTM300 Series Transmitter-Monitor, Customer Design Products.

Including the following module types: YTM391 System Integration Module, YTM301/YM201 Shaft Vibration Transmitter-Monitor,YTM302/YTM202 Thrust Position Transmitter-Monitor, YTM101 Case Vibration Transmitter-Monitor.

Customer Design products

Those transmitter Monitors need to work with YTM391 System Integration Module.

Customer Design products.

This transmitter Monitor needs to work with YTM391 System Integration Module.

Customer Design products.

Those transmitter Monitors need to work with YTM391 System Integration Module.

Copyright © Provib Tech.com. . All Rights Reserved